Optrel Panoramaxx Welding Helmet with FREE Lens and Backpack
Welding for Less is your premier provider for discount welding supplies online. Get in touch with us for all your welding supply needs we have you covered.
Why Optrel Panoramaxx welding helmet is useful for welding
An optrel panoramaxx welding helmet is useful for the welding helmet mentioned earlier, hot metal still glows for some time, and its radiation can adversely affect vision. The Optrel Welding Helmet in lightning will help protect the eyes as the metal cools. Also, if the arc ignites again, the filter will not switch and cause you discomfort. There are masks with two and four sensors. For normal and stable operation of the filter operation, devices with two sensors are considered the norm. Four sensors will protect the welder from accidental exposure to bright light and minimize the possibility of "catching a bunny", for example, when there is a faulty sensor or welding is carried out at the wrong angle and the light from the arc is blocked by various objects or structures. In this case, four sensors guarantee the smooth operation of the mask. Remember that operator comfort and convenience are critical to efficiency and productivity. Before buying, it is advisable, of course, to try on a mask to make sure that it fits in size and is comfortable for you. If this is not possible, pay attention to the design, weight, and parameters of the mask. Masks can weigh from 0.5 to 2 kg, of course, for occasional infrequent work, this parameter is not particularly important.
Uses of Optrel Panoramaxx welding helmet
The uses of optrel panoramaxx welding helmet but if you need to work often and for a long time, then with a weight of 2 kg it will not be very comfortable. Pay attention to the Optrel Welding Protection, there must be an adjustment for the depth of the mask, the angle of inclination, and the distance from the face to the light filter. Also, a headband with a soft material coating will not be superfluous. Take care of the light filter, it is easily scratched, wipe it with a clean soft cloth, moisten it with water if necessary. Do not wipe the light filter with alcohol or solvents - you will damage the special film, which will lead to partial dysfunction. - At low temperatures, filters may work with a delay in darkening and brightening, please take this into account when working outdoors in winter. - To check the performance of a new filter, look through it at the sun, it will darken and brighten after a couple of seconds, this is considered a normal operation, because. the light filter responds to variable radiation.
The advantages of the Optrel Panoramaxx welding helmet
The advantages of the optrel panoramaxx welding helmet If you look through the filter at the lamp, the screen will darken and will not brighten, because. the Welding Helmet supply is alternating current and the lamp flashes at a frequency of 50 Hz. - You can also check the performance of the fewer masks lit match or a flashlight. If the filter does not respond to any light source, it is most likely that the battery charge needs to be checked. First, I will briefly describe the principle of welding for fewer masks. In the light filter, between ordinary glasses, there is a layer with liquid crystals. They work in pairs with photocells called sensors. Under normal illumination, the crystals are perpendicular to the plane of the glass and transmit light well. When there is a bright flash from the welding arc, the photosensors detect it and give the command to turn the crystals. The latter become parallel to the plane of the glass, darkening it. The light filter works automatically. When the arc is extinguished, the crystals rotate to their original position, increasing the glass's throughput welding helmet.